Turbomix-150 Mobile Concrete Batching Plant

AGGREGATE BUNKER:

• • Bunker Capacity: 120 m³
  • Number of compartments: 4 x 30 m³
  • Made of 6 mm ST-37 A1 quality specially curved sheet for longer life.
  • There is 2 x 0.37 kW vibro motor in the sand chamber to increase the fluidity.
  • If desired, optionally, grid can be installed in the system to prevent coarse aggregate.
  • Discharge is provided by pneumatic piston.

Aggregate Weighing Hopper:

• Bunker capacity: 8800 kg
• The bunker body is made of ST-37 A1 quality 5 mm sheet metal, its top is reinforced to prevent abrasion.
• 0.37 kW vibro motor.
• Loadcell: 4 x 5000 kg

TWIN-SHAFT MIXER: 

• 4.5 m3 Twin Shaft Mixer.
• The drive group is connected to a 2 x75 kW electric motor via a planetary reducer coupling.
• Motor and Reducer: Heavy Duty Type Mixing Arms in 2 Pieces Spheroid Graphite Cast Irons
• Hydraulic Power Pack with Manual Pump for Emergency Opening of Discharge Gate
• Moving parts of gearboxes and bearings are permanently lubricated with grease
• Two top covers (500 mm) and two wide hinged high doors.
• Hydraulically operated Standard Discharge Gate with three limit switches (Open, Half Open, Closed).
• Closing is driven by a Pressure Gauge on the Hydraulic Power Pack
• Modular examination platform with access ladder and handrails.
• Mix motors with insulation materials Class H, Protection Class: IP55.
• Hydraulic System Engine: 2,2 kW

AGGREGATE PRE FEEDING SYSTEM(OPTIONAL)

Capacity of the bunker : 7 m3

Length of Conveyor: 800×22000 mm

Motor of Conveyor:  15 kW

CEMENT SILO:

• Capacity: OPTIONAL
• Filter: 24 m² upper area (WAM brand)
• Silo protection flap: – (WAM brand)
• Level indicators: 2 pcs. each (WAM, ILTC220)
• Silo filling pipe: Ø 114mm steel pipe

CEMENT SCREWS:

• Brand: WAM (Italy)
• Dimensions: Ø323 x 6000 mm
• Electric motor: 5,5 kW – 1450 d/d

CONTROL CABIN:

• The control cabinet is installed on the thermal insulation chassis.
• Cabinet content consists of:
• Power source
• Mix control terminal
• Input power 380/440 +/- 5%
• Output power 220 and 24 volts
• Automatic control unit
• Software
• Control Board
• Plotter
• PLC